<?xml version="1.0"?>
<!-- Created with ExoImplantEditor [Version 4909] -->
<ImplantLibraryEntry xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>TI-BASE BELL(GEO) OSSTEM</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <SupportOrientation>-1</SupportOrientation>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_OSSTEM_MINI_EXO_CAD.STL</ScrewFilename>
      <ImplantFilename>ANALOG_OSSTEM_MINI_EXO_CAD.STL</ImplantFilename>
      <DisplayInformation>Mini</DisplayInformation>
      <Keyword>Mini</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00017160270363092423</y>
            <z>10.469431877136231</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH2.0</DisplayInformation>
          <Keyword>fullbellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00088283512741327286</y>
            <z>10.471590042114258</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH2.</DisplayInformation>
          <Keyword>bridgebellgeoGH2</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00090148299932479858</y>
            <z>10.469441413879395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH1.3</DisplayInformation>
          <Keyword>fullbellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00088283512741327286</y>
            <z>10.471590042114258</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH1.3</DisplayInformation>
          <Keyword>bridgebellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00014585256576538086</y>
            <z>10.473513603210449</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH2.0</DisplayInformation>
          <Keyword>shortfullbellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00027197599411010742</y>
            <z>10.470914840698242</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH2.0</DisplayInformation>
          <Keyword>shortbridgebellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00012618303298950195</y>
            <z>10.470603942871094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH1.3</DisplayInformation>
          <Keyword>shortfullbellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00012618303298950195</y>
            <z>10.470603942871094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH1.3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00052857398986816406</y>
            <z>7.1486592292785645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>fullbellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0015628337860107422</y>
            <z>7.1494693756103516</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>bridgebellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0030701160430908203</y>
            <z>7.150942325592041</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>fullbellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0014474391937255859</y>
            <z>7.15073299407959</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>bridgebellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0020518302917480469</y>
            <z>7.1576533317565918</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>shortfullbellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0023655891418457031</y>
            <z>7.1542930603027344</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00096392631530761719</y>
            <z>7.1533002853393555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>shortfullbellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0040762424468994141</y>
            <z>7.142855167388916</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_OSSTEM_REGULAR_V5_exocad.STL</ScrewFilename>
      <ImplantFilename>ANALOG_OSSTEM_REG_EXOCAD.STL</ImplantFilename>
      <DisplayInformation>Regular</DisplayInformation>
      <Keyword>Regular</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-2.288818359375E-05</y>
            <z>10.45014762878418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH2.0</DisplayInformation>
          <Keyword>fullbellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>5.14984130859375E-05</y>
            <z>10.450225830078125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH2.0</DisplayInformation>
          <Keyword>bridgebellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>5.340576171875E-05</y>
            <z>10.450149536132813</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH3.0</DisplayInformation>
          <Keyword>fullbellgeoGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-2.574920654296875E-05</y>
            <z>10.450223922729492</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH3.0</DisplayInformation>
          <Keyword>bridgebellgeoGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.0004558563232421875</y>
            <z>10.448971748352051</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH1.3</DisplayInformation>
          <Keyword>fullbellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00087773799896240234</y>
            <z>10.451875686645508</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH1.3</DisplayInformation>
          <Keyword>bridgebellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00069659948348999023</y>
            <z>10.451029777526856</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH2.0</DisplayInformation>
          <Keyword>shortfullbellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00058263540267944336</y>
            <z>10.450942993164063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH2.0</DisplayInformation>
          <Keyword>shortbridgebellgeoGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00027823448181152344</y>
            <z>10.450083732604981</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH3.0</DisplayInformation>
          <Keyword>shortfullbellgeoGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.001010894775390625</y>
            <z>10.449062347412109</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH3.0</DisplayInformation>
          <Keyword>shortbridgebellgeoGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.0001354217529296875</y>
            <z>10.449851036071777</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH1.3</DisplayInformation>
          <Keyword>shortfullbellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00042676925659179688</y>
            <z>10.449807167053223</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH1.3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00072294473648071289</y>
            <z>7.1447772979736328</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>fullbellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0013742446899414063</y>
            <z>7.1579012870788574</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>bridgebellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0039712190628051758</y>
            <z>7.159660816192627</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH3.0 V2/V3</DisplayInformation>
          <Keyword>fullbellgeoGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0014070272445678711</y>
            <z>7.16030216217041</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH3.0 V2/V3</DisplayInformation>
          <Keyword>bridgebellgeoGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.022531509399414062</y>
            <z>7.159827709197998</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>full bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>fullbellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00046825408935546875</y>
            <z>7.1496586799621582</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>bridge bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>bridgebellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0090031623840332031</y>
            <z>7.1576657295227051</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>shortfullbellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0032763481140136719</y>
            <z>7.155726432800293</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH2.0 V2/V3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00060224533081054688</y>
            <z>7.1514372825622559</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH3.0 V2/V3</DisplayInformation>
          <Keyword>shortfullbellgeoGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.002994537353515625</y>
            <z>7.1447920799255371</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH3.0 V2/V3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0058474540710449219</y>
            <z>7.1524505615234375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short full bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>shortfullbellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00056934356689453125</y>
            <z>7.1560893058776855</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>short bridge bell(geo) GH1.3 V2/V3</DisplayInformation>
          <Keyword>shortbridgebellgeoGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>